JET 354214 J-2232AC, 20-in Vs Drill Press 220V, 3Ph

JET 354214 J-2232AC, 20-in Vs Drill Press 220V, 3Ph Reviews

Other Picture

JET 354214 J-2232AC, 20-in Vs Drill Press 220V, 3Ph Feature

• Variable spindle speeds from 65 to 2,000 RPM
• MT-3 spindle taper
• Latest AC inverter variable speed technology
• High torque at all speeds both forward and reverse
• Continuous speed adjustment while in operation

Includes J-2232AC, 20-in Vs Drill Press 220V, 3Ph - 354214

Visit Store Now !!

Detail Products

Detail Reviews

Feb 28, 2011 18:44:06

Jet 690038 JVM-836-3 230-Volt 3 Phase Vertical Milling Machine

Jet 690038 JVM-836-3 230-Volt 3 Phase Vertical Milling Machine Reviews

Other Picture

Jet 690038 JVM-836-3 230-Volt 3 Phase Vertical Milling Machine Feature

• Work piece can be up to 500 pounds for a wide variety of milling applications
• 1.5HP, 3Ph, 230V motor for optimal milling power
• 10-1/2 inches of ram travel for maximum versatility
• Collet capacity is 1/8-7/8 inches
• 10 spindle speeds ranging from 120-1550 RPM

The Jet 690038 JVM-836-3 Vertical Milling Machine has all of the features of larger mills, but is sized perfectly for home workshops, repair shops or small maintenance shops.  The powerful 1-1/2-horsepower motor is prewired at 230 volts.  The ten spindle speeds (120 to 1,550 RPM) and large quill capacity (1/8-inch to 7/8-inch diameter) offer you an even wider range of uses.

Features:

• Precision bored and honed milling head
• Large diameter quill is chromed
• High precision spindle bearings
• Over 10 inches of front to back ram travel
• Locks on all movable surfaces
• Hardened and ground precision table
• Head tilts left or right
• Graduated scale on column
• Precision ground dovetail ways
• Can handle pieces up to 500 pounds

What's In The Box:

• Jet 690038 JVM-836-3 Vertical Milling Machine
• One-Shot Lubrication System
• Way Covers
• Draw Bar
• Tool Box and Tools

Visit Store Now !!

Detail Products

Detail Reviews

Feb 27, 2011 16:03:05

Foot Pedal and Gun Kit

Foot Pedal and Gun Kit Reviews

Other Picture

Foot Pedal and Gun Kit includes foot pedal assembly, inlet hose, outlet hose, complete siphon gun (without trigger), 1/4in. N.P.T. pipe coupler and flat washers. Some assembly required.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 26, 2011 20:11:04

Pro Grade Spot Shot Air Sand Blaster Kit - Closed Cycle/Recycling

Pro Grade Spot Shot Air Sand Blaster Kit - Closed Cycle/Recycling Reviews

Other Picture

Pro Grade Spot Shot Air Sand Blaster Kit - Closed Cycle/Recycling Feature

• Effectively cleaning hard to reach corners and edges
• Spot sand blasting gun without blasting grit
• Comew with 4 different nozzles - Surface spot, inside corner, outside corner, and panel edge
• 500 gram of abrasive included
• Close cycle dust free blast

Air Spot Blaster Kit. Spot Sand Blasting Gun. Surface Spot Nozzle. Inside Corner Nozzle. Outside Corner Nozzle. Panel Edge Nozzle. 1/4" NPT. Closed cycle blast. 90 psi. Includes 500g of abrasive sand

Visit Store Now !!

Detail Products

• Dewalt DPG82-11C Concealer Clear Anti-Fog Dual Mold Safety Goggle
• Northern Industrial Protective Abrasive Blasting Hood with Bump Cap
• Dry Top 210125 10-by-12-Foot Super Heavy-Duty 10-Mil UV Treated Tarp, Silver/Brown Reversible
• Campbell Hausfeld MP6000 Tire Inflator with Gauge
• Bucket Boss Brand 07004 Duckwear Tool Roll

Detail Reviews

Feb 25, 2011 18:08:04

Mike Mahoney on the McNaughton Center Saver DVD

Mike Mahoney on the McNaughton Center Saver DVD Reviews

Other Picture

Mike Mahoney on the McNaughton Center Saver DVD Feature

• Setup and differences of each tool
• Sharpening
• Miniature, regular, and large set
• Advanced techniques to nest bowls
• Chucking methods

Mike discusses how to properly use the McNaughton Center Saver with ease and efficiency. This DVD is a primer to understanding the science of how to create a set of nesting bowls utilizing a tool that is an ecological but an economical tool as well. 80 minutes.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 24, 2011 14:12:06

Gh-1440w-1 Lathe, Newall Dro, Collet Closer

Gh-1440w-1 Lathe, Newall Dro, Collet Closer Reviews

More Picture

GH-1440W-1 Lathe, NEWALL DRO, Collet Closer Hardened and ground gears are featured in the headstock and gearboxD1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearingsHeadstock is constantly oiled during operationSplined, not keyed, shafts are utilizedGearbox gives larger threading and feed capabilities with no gear changesV-way bed design is induction hardened and groundGap bed section provided for larger diameter workIndependent lead screw and feed rodSpindle actuation control is apron mountedInch-metric dials are standardCompound and cross slide have backlash eliminationAdjustable gibs are incorporated in the carriage and slidewaysTailstock may be offset for turning tapers and includes an inch-metric graduated quillTolerance test certificate includedHeavy duty stand6" 3 jaw direct mount chuck with top reversing jaws8" 4 jaw chuck12" face plateFour-way tool postSteady and follow restMicro-carriage bed stopFront removable chip trayAccessories Included Specially designed for each modelPrecision ground componentsUses 5C colletsRear mounted lever action FREE GROUND SHIPPING 73.75 L. 47.50 W. 29.50 H.

Go tO Store Now !!

More Products

More Reviews

Feb 23, 2011 09:59:03

Press Accessory Set for 17 1/2 Ton Press

Press Accessory Set for 17 1/2 Ton Press Reviews

More Picture

Press Accessory Set for 17 1/2 Ton Press Adapters & accessories are attached to the ram`s forcing screw or used on the press bed to support the work. With these accessories, makeshift pressing setups are nearly eliminated. Weight: 21 lbs. 10 oz. Set Includes:OTC No. 1123 - Bearing pulling attachment. OTC No. 201923 - Ram pushing adapter w/ 1/2" diameter shank. OTC No. 201454 - Ram pushing adapter w/ 3/4" diameter shank. OTC No. 34806 - V pushing adapter. OTC No. 1890 - Pair of V blocks.

Go tO Store Now !!

More Products

More Reviews

Feb 22, 2011 06:46:04

Jtm-1050evs/230 Mill, Newall 3-Axis (Quill) C80 Dro, X Powerfeed Installed

Jtm-1050evs/230 Mill, Newall 3-Axis (Quill) C80 Dro, X Powerfeed Installed Reviews

More Picture

JTM-1050EVS/230 Mill, NEWALL 3-Axis (Quill) C80 DRO, X Powerfeed Installed Runs quieter and smoother than conventional variable speed headLow maintenance head has less moving partsNo belt slippage allows more power at spindleMeehanite castingHardened and ground tableChrome lead screws on X and Y axisTurcite B on X and Y axisLarge diameter quill is chromedHigh precision Class 7 spindle bearingsNo fuse breaker power connectionsHeavy duty motor driveChrome plated motor shaft with bearing support at endOne piece quill and pinion shaftThree stage power downfeed with automatic stopHeavy duty spindle brakeDouble locks on all movable surfacesHardened and ground square vertical knee ways and cross waysAdjustable gibs throughoutInternal coolant tank built into base for use with coolant system (coolant pump not included)Tolerance test sheet includedOne shot lubrication systemWay coversDraw bar 95.75 L. 88.00 W. 71.00 H.

Go tO Store Now !!

More Products

More Reviews

Feb 21, 2011 08:31:03

DELTA 46-715 9.8 Amp 14-Inch Swing by 40-Inch between Centers 3/4-Horsepower Woodworking Lathe, 120-Volt 1-Phase

DELTA 46-715 9.8 Amp 14-Inch Swing by 40-Inch between Centers 3/4-Horsepower Woodworking Lathe, 120-Volt 1-Phase Reviews

More Picture

DELTA 46-715 9.8 Amp 14-Inch Swing by 40-Inch between Centers 3/4-Horsepower Woodworking Lathe, 120-Volt 1-Phase Feature

• Delta 3/4-horsepower lathe includes 10 speeds to suit your projects
• Head stock rotates at 45, 90, and 180-degree angles
• 24-position index on pulley allows you to create ornamental detailing
• Includes a cast-iron tool rest measuring 12 inches, a convenient on/off switch positioned above the motor, and a durable steel stand
• Measures 62.6- by 22.4- by 18.4-inches; weighs 338-pounds

The DELTA 46-715 9.8 Amp 14-Inch Swing by 40-Inch between Centers 3/4-HP Woodworking Lathe is designed with a convenient 10-position speed change powered by a 0.75 HP, 60 Hz motor. It includes a speed range of 450 to 600 RPM. The cast-iron design of the lathe reduces vibrations for greater accuracy. Head stock rotates at 45- , 90- , and 180-degree angles anywhere along the bed for bowl or general outboard turning. The pulley includes a 24-position index scale that allows you to indulge in intricate, ornamental detailing, while the spindle comes with 24 lockable positions, great for making precise calculations and cuts. The lathe also includes a cast-iron tool rest measuring 12 inches, a convenient on/off switch positioned above the motor, and a durable steel stand.

Go tO Store Now !!

More Products

• PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece

More Reviews

Feb 20, 2011 12:38:03

Milwaukee 6242-6 Compact Band Saw Kit

Milwaukee 6242-6 Compact Band Saw Kit Reviews

More Picture

Milwaukee 6242-6 Compact Band Saw Kit Feature

• 45% Lighter than Deep Cut - 9.5 Lbs compact light weight design for cutting overhead and in tight places. 200-360 SFPM Variable Speed Dial? adjusts the speed for more accurate cuts and hard materials
• 3-1/4? Cut Capacity ? cuts most common materials for Electrician, Plumber and Mechanical cutting applications. Single pass cut on 3? copper, 3? angle iron, 2-1/2? conduit.
• Tool-Free Adjustable Material Shoe ? quickly adjusts the shoe and allows flush cuts when working with installed materials against walls and ceilings. LED Work Light ? illuminates the cut line in tight spaces and dark areas.
• Blade Ejection System-Quickly change the blade by moving the material guide into the up position and depressing the blade ejection button. Drop Resistant Pulley Guard-Engineered geometries & high impact polymer.
• Cast Aluminum Gear Case-Withstands jobsite abuse & maintains gear positioning.

At only 9 1/2 lbs. and 16in. in length, the Milwaukee Compact Band Saw is the perfect tool for cutting metal in-place, overhead or in tight spaces. The Compact Band Saw also features a worklight, blade ejection system and a tool-free adjustable material guide that allows the user to make cuts flush to ceilings or walls. Cordless: No, Volts: 120, Variable Speed: Yes, Cutting Capacity (SFPM): 200 - 360, Blade Included: Yes, Case Included: Yes

Go tO Store Now !!

More Products

• Milwaukee 48-39-0538 Compact Band Saw Blade 35-3/8-Inch 24TPI
• Milwaukee 48-39-0528 Compact Band Saw Blade 35-3/8-Inch 18TPI
• Milwaukee 48-39-0509 Compact Band Saw Blade 35-3/8-Inch 10TPI, 3 Pack
• Milwaukee 48-39-0518 Compact Band Saw Blade 35-3/8-Inch 14TPI
• Milwaukee 48-39-0539 Compact Band Saw Blade 35-3/8-Inch 24TPI, 3 Pack

More Reviews

Feb 19, 2011 17:33:09